Skip to content
Return to main site

HSC Mathematics Extension 1

Vector projections: formula and worked HSC examples

On this page

This article explains scalar and vector projections in Extension 1, with worked examples in two and three dimensions.

The scalar projection of a onto b is a signed number. The vector projection is the vector component of a along the line in the direction of b. For b ≠ 0:

comp⁡ba=a⋅b∣b∣.\operatorname{comp}_{\mathbf b}\mathbf a=\frac{\mathbf a\cdot\mathbf b}{|\mathbf b|}. proj⁡ba=a⋅b∣b∣2b.\operatorname{proj}_{\mathbf b}\mathbf a=\frac{\mathbf a\cdot\mathbf b}{|\mathbf b|^2}\mathbf b.

Here a⋅b\mathbf a\cdot\mathbf b is the dot product, found by multiplying matching components and adding. The bars in ∣b∣|\mathbf b| mean the magnitude, or length, of b.

The denominator comes from the vector you project onto. Scalar projection divides by its magnitude; vector projection divides by its magnitude squared, then multiplies by that vector. Projection onto the zero vector is undefined because it has no direction.

For the 2027 HSC, Extension 1 uses the 2024 syllabus. Its Year 12 outcome ME1-12-02 includes operations with 2D and 3D vectors. See NESA's implementation advice and outcomes; NESA's glossary gives the vector-projection definition.

Picture a perpendicular projection

Draw O = (0, 0), A = (2, 4) and P = (3, 1) for the first example. The arrow from O to A is a, and the arrow from O to P is b. Draw the line through O and P, then join A to P. AP meets that line at a right angle, so OP is the vector projection of a onto b.

In general, the projection runs from the shared origin to the perpendicular foot on the line through b. That foot may fall beyond the tip of b or behind the origin.

If θ is the angle between nonzero a and b, the dot-product identity gives:

a⋅b∣b∣=∣a∣cos⁡θ.\frac{\mathbf a\cdot\mathbf b}{|\mathbf b|}=|\mathbf a|\cos\theta.

That is the signed component along b. Multiplying it by b/|b|, a unit vector of length 1 pointing in the direction of b, gives the vector formula above.

Worked example: a projection in 2D

Find both projections of a = (2, 4) onto b = (3, 1).

Calculate the dot product and ∣b∣|\mathbf b|:

a⋅b=2(3)+4(1)=10.\mathbf a\cdot\mathbf b=2(3)+4(1)=10. ∣b∣=32+12=10.|\mathbf b|=\sqrt{3^2+1^2}=\sqrt{10}.

The scalar projection is:

comp⁡ba=1010=10.\operatorname{comp}_{\mathbf b}\mathbf a=\frac{10}{\sqrt{10}}=\sqrt{10}.

The vector projection is:

p=proj⁡ba=1010(3,1)=(3,1).\mathbf p=\operatorname{proj}_{\mathbf b}\mathbf a=\frac{10}{10}(3,1)=(3,1).

Check the perpendicular remainder: a − p = (−1, 3), and (−1, 3) · (3, 1) = −3 + 3 = 0. The projection lies along b, while the remainder is perpendicular to it.

What a negative projection tells you

Let a = (−4, 2) and b = (1, 0). Here a · b = −4 and |b| = 1, so:

comp⁡ba=−4.\operatorname{comp}_{\mathbf b}\mathbf a=-4. proj⁡ba=(−4,0).\operatorname{proj}_{\mathbf b}\mathbf a=(-4,0).

The negative scalar projection tells you that the component points opposite to b. The length of the projected vector is 4. Keep the minus sign when reporting the scalar projection; use an absolute value only when the question asks for length.

The same calculation in 3D

Project a = (2, −1, 3) onto b = (1, 2, 2). The dot product is 2 − 2 + 6 = 6, and |b|² = 1 + 4 + 4 = 9.

comp⁡ba=63=2.\operatorname{comp}_{\mathbf b}\mathbf a=\frac63=2. p=69(1,2,2)=(23,43,43).\mathbf p=\frac69(1,2,2)=\left(\frac23,\frac43,\frac43\right).

As a check, (a − p) · b = 4/3 − 14/3 + 10/3 = 0. The remainder is perpendicular to b, as required.

Check the denominator, answer type and direction

Return to the 2D example with a = (2, 4) and b = (3, 1). Using |a|² in the denominator gives (3/2, 1/2). Its remainder has dot product 5 with b, so the remainder is not perpendicular to b. The denominator should be |b|² = 10.

For a vector projection, multiply the coefficient by b. Here 10/10 = 1 is only the coefficient; the vector answer is (3, 1). The scalar projection uses a different denominator and equals √10.

Check the order too. Projecting b onto a gives (10/20)(2, 4) = (1, 2). Although the dot product is unchanged, swapping the vectors changes the projection.

Try two questions

  1. Find the scalar and vector projections of u = (5, −1) onto v = (2, 1).
  2. Find both projections of u = (1, 0, −2) onto v = (2, −1, 2), and state the projected length.

Solutions

  1. u · v = 9 and |v|² = 5. Scalar: 9/√5. Vector: (9/5)(2, 1) = (18/5, 9/5). Check: (7/5, −14/5) · (2, 1) = 0.
  2. u · v = −2 and |v|² = 9. Scalar: −2/3. Vector: (−2/9)(2, −1, 2) = (−4/9, 2/9, −4/9). Length: 2/3. Check: (13/9, −2/9, −14/9) · (2, −1, 2) = 0.

For more practice, use the Extension 1 past-paper guide or see Plume's Extension 1 classes and free trial times.